Skip to content

L
Laisi_AutoMES2
Commit 42d0244f by jiawei.su
Options

someupdate

parent f4713769
Showing with 87 additions and 44 deletions
Server/Apis/Siger.ApiACC/Controllers/AutomationController.cs
......@@ -254,15 +254,17 @@ namespace Siger.ApiACC.Controllers
//PLC 反馈结束.
if (status == (int)TaskResultStatus.Complated)
{
var location = _automationLocation.Get(f => f.fixturetools == taskObj.fixtureguid && f.locationid == taskObj.locationid);
if (location == null)
{
Logger.WriteLineInfo($"PlCfeeback 未找到该工装储位信息");
throw new BadRequestException(AccEnum.MachineDisable);
}
// 业务入口： 上料位-》 入库 如果是上料工装 安装完成 ,绑定 储位与装配
if (sectionProperty.propertytype == 1)
{
var location = _automationLocation.Get(f => f.fixturetools == taskObj.fixtureguid && f.locationid == taskObj.locationid);
if (location == null)
{
Logger.WriteLineInfo($"PlCfeeback 未找到该工装储位信息");
throw new BadRequestException(AccEnum.MachineDisable);
}
//绑定SN 工件到立库储位
if (taskObj.action == TaskAction.Step_SXLW_LK)
{
......@@ -281,40 +283,55 @@ namespace Siger.ApiACC.Controllers
{
//location.sn = "";
location.status = (int)LocationStatus.Out;
_automationLocation.Update(location);
}
}
// CNC 设备
if (sectionProperty.propertytype == 2)
{
if (taskObj.action== TaskAction.Step_LK_JGZX )
{
location.status = (int)LocationStatus.Out;
_automationLocation.Update(location);
}
}
if (sectionProperty.propertytype==4)
//抽检台
if (sectionProperty.propertytype == 3)
{
if (taskObj.action == TaskAction.Step_LK_CJT)
{
location.status = (int)LocationStatus.Out;
_automationLocation.Update(location);
}
//清洗即 完成
}
//清洗机
if (sectionProperty.propertytype==4)
{
if(taskObj.action==TaskAction.Step_QXJ_LK)
{
var location = _automationLocation.Get(f => f.fixturetools == taskObj.fixtureguid && f.locationid == taskObj.locationid);
if (location == null)
//上料 指定的第一道工序
var route = _productRoute.GetList(f => f.productId == taskObj.productid && f.status == (int)RowState.Valid, "serialNumber", true).FirstOrDefault();
if (route == null)
{
Logger.WriteLineInfo($"PlCfeeback 未找到该工装储位信息");
throw new BadRequestException(AccEnum.MachineDisable);
throw new BadRequestException(AccEnum.ProductRouteMissing);
}
if (route.id == location.routeid)
{
Logger.WriteLineInfo($"PlCfeeback 工装储位{taskObj.locationid} 工序{location.routeid}-{location.routenum}完成");
//最后一道工序
location.routeid = 0;
location.status = (int)LocationStatus.In;
_automationLocation.Update(location);
}
else
{
Logger.WriteLineInfo($"PlCfeeback 工装储位{taskObj.locationid} 工序{location.routeid}-{location.routenum}为完成");
}
//location.sn = "";
location.status = (int)LocationStatus.In;
_automationLocation.Update(location);
}
}
if (monitor != null && taskObj.action == TaskAction.Step_SXLW_LK)
{
monitor.section = 0;
}
}
if (monitor != null)
......@@ -397,24 +414,25 @@ namespace Siger.ApiACC.Controllers
Logger.WriteLineError($"AutoProcess 清洗机{cleanMachine.section}machineMonitor 为空");
return;
}
CreateTask(cleanMachine.section, TaskActionType.Unload, TaskAction.Step_JGZX_QXJ, machineMonitor.fixtureguid, machineMonitor.ordernumber, machineMonitor.sn, "", machineMonitor.productId, machineMonitor.productCode, machineMonitor.locationId, machineMonitor.route);
CreateTask(cleanMachine.section, TaskActionType.Unload, TaskAction.Step_QXJ_LK, machineMonitor.fixtureguid, machineMonitor.ordernumber, machineMonitor.sn, "", machineMonitor.productId, machineMonitor.productCode, machineMonitor.locationId, machineMonitor.route);
}
else
{
var locationObj = _automationLocation.Get(f => f.projectId == PID && f.locationid == tasklist.locationid);
if (locationObj == null)
{
Logger.WriteLineError($"AutoProcess 立库 为空");
return;
}
//工件回到立库
locationObj.status = (int)LocationStatus.In;
_automationLocation.Update(locationObj);
CreateTask(cleanMachine.section, TaskActionType.Unload, TaskAction.Step_QXJ_LK, tasklist.fixtureguid, tasklist.ordercode, tasklist.sn, "无程序", tasklist.productid, tasklist.productcode, tasklist.locationid, tasklist.route);
return; //完成当前任务 退出
}
//else
//{
// var locationObj = _automationLocation.Get(f => f.projectId == PID && f.locationid == tasklist.locationid);
// if (locationObj == null)
// {
// Logger.WriteLineError($"AutoProcess 立库 为空");
// return;
// }
// //工件回到立库
// locationObj.status = (int)LocationStatus.In;
// _automationLocation.Update(locationObj);
// CreateTask(cleanMachine.section, TaskActionType.Unload, TaskAction.Step_QXJ_LK, tasklist.fixtureguid, tasklist.ordercode, tasklist.sn, "无程序", tasklist.productid, tasklist.productcode, tasklist.locationid, tasklist.route);
// return; //完成当前任务 退出
//}
}else
}
else
{
Logger.WriteLineInfo($"AutoProcess 清洗机未完成");
}
......
Server/Apis/Siger.ApiACC/Controllers/AutomationOperateController.cs
......@@ -187,7 +187,14 @@ namespace Siger.ApiACC.Controllers
{
throw new BadRequestException(AccEnum.LineIsAutoMode);
}
var attr = _sigerProjectMachineAttribution.Get(f => f.station == taskobj.sectionid && f.status == 1);
var section = taskobj.sectionid;
//抽检台-》上料位特殊逻辑
if (taskobj.action == Automation.TaskAction.Step_CJT_SXLW)
{
section = taskobj.extend1.ToInt();
}
var attr = _sigerProjectMachineAttribution.Get(f => f.station == section && f.status == 1);
if (attr==null)
{
throw new BadRequestException(CommonEnum.RecordNotFound);
......@@ -599,7 +606,7 @@ namespace Siger.ApiACC.Controllers
productcode = location.productcode,
processid = 0,
programnumber = "",
remark = "手动任务-准备下料",
remark =lineMode.inspect==1? "准备下料-》抽检台":"准备下料",
extend1= unixtime.ToStr()
});
......
Server/Apis/Siger.ApiACC/Controllers/QmsCheckController.cs
......@@ -266,6 +266,7 @@ namespace Siger.ApiACC.Controllers
{
try
{
CreateTaskList(req.sectionid, req.productid, product.code, req.sn, req.routeid.ToInt());
AddSnList(req.materialid.ToInt(), inspection, product.code, section.parentid);//把二维码插入到 sn_list表
}
......@@ -328,9 +329,16 @@ namespace Siger.ApiACC.Controllers
if (monitor==null)
{
Logger.WriteLineInfo($"检验工站{section} monitor 为空");
throw new BadRequestException(CommonEnum.RecordNotFound);
}
//找到上下料位
var tasklst = _automationTaskList.Get(f => f.no == monitor.taskno);
if (tasklst==null)
{
Logger.WriteLineInfo($"检验工站{section} tasklst 为空");
throw new BadRequestException(CommonEnum.RecordNotFound);
}
var taskNo = _automationTaskList.CrateTaskNumber(Automation.TaskTrigerType.Manual);
_automationTaskList.Insert(new siger_automation_task_list
{
no = taskNo,
......@@ -354,7 +362,8 @@ namespace Siger.ApiACC.Controllers
productcode = productcode,
processid = routeid,
programnumber = "",
remark = "质量检验",
remark = "质量检验->上下料位置",
extend1=tasklst.sectionid.ToString(),//上下料位发起到检验的工站
});
monitor.taskno = taskNo;
......
Server/Apis/Siger.ApiACC/Tasks/AutoMES.cs
......@@ -3,8 +3,10 @@ using Newtonsoft.Json;
using Siger.Middlelayer.AccRepository.Request;
using Siger.Middlelayer.Common;
using Siger.Middlelayer.Common.Configuration;
using Siger.Middlelayer.Common.Extensions;
using Siger.Middlelayer.Common.Helpers;
using Siger.Middlelayer.Common.Log;
using Siger.Middlelayer.Share.Enum.ModuleEnum;
using System;
using System.Collections.Generic;
using System.Linq;
......@@ -43,10 +45,17 @@ namespace Siger.ApiACC.Tasks
var task = tasks.FirstOrDefault();
if (task.send == 1)
return;
var levelsction = dbhelper.GetLevelsection(task.sectionid);
var section = task.sectionid;
//抽检台-》上料位特殊逻辑
if (task.action== Automation.TaskAction.Step_CJT_SXLW)
{
section = task.extend1.ToInt();
}
var levelsction = dbhelper.GetLevelsection(section);
if (levelsction == null)
return;
var attr = dbhelper.GetAttribution(task.sectionid);
var attr = dbhelper.GetAttribution(section);
if (attr == null)
return;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment